Then you can enter 0 (with participant's permission) or enter 1 (without participant's permission) during the conference call, and follow the voice prompt to invite other party to the conference. Please make sure option "Enable User Invite" is turned on for the conference room first. ![]() A call will be sent to the extension to participate in the conference.Ī conference participant can also invite other parties to the conference from the phone during the call. Click on it and enter the extension number of the party you would like to invite. From UCM6100 series web GUI->PBX->Call Features->Conference, there is an option icon "Invite a participant" on each conference room. Registered SIP devices- supports up to 500 registered SIP devices/users, -Concurrent SIP calls- Up to 75 (UCM6204), or 66% performance if calls are SRTP encrypted Unit Weight 2.165 kg, Package Weight 3.012 kg Up to 8 bridges, up to 64 simultaneous conference attendeesĬall park, call forward, call transfer, DND, DISA, ring group, pickup group, blacklist, paging/intercom etc. Up to 2000 registered SIP endpoints, up to 200 concurrent calls Multiple configurable call queues, automatic call distribution (ACD) based on agent skills/availability/work-load, in-queue announcement TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DDNS, DHCP, NTP, TFTP, SSH, HTTP/HTTPS, PPPoE, SIP (RFC3261), STUN, SRTP, TLS, LDAP, HDLC, HDLC-ETH, PPP, Frame Relay (pending)įail2ban, alert events, Whitelist, Blacklist, strong password based access control ![]() Operating 32 ~ 104✯ / 0 ~ 40✬, 10 ~ 90% (non-condensing) Storage 14 ~ 140✯ / -10 ~ 60✬įCC Part 15 (CFR 47) Class B, Part 68, CE EN55022 Class B, EN55024, EN6, EN6, EN60950-1, TBR21, RoHS, A-TICK AS/NZS CISPR 22 Class B, AS/NZS CISPR 24, AS/NZS 60950, AS/ACIF S002, ITU-T K.21 (Basic Level), UL 60950 (power adapter)Ģx RJ11 ports (both with lifeline capability in case of power outage)ĭual Gigabit ports (switched or routed) with PoE+ Unit weight 0.51kg, Package weight 0.94kg Up to 3, password-protected conference bridges allowing up to 25 simultaneous PSTN or IP participantsĬall park, call forward, call transfer, DND, ring/hunt group, paging/intercom etc. Registered SIP devices- supports up to 500 registered SIP devices/users, -Concurrent SIP calls- Up to 50 (UCM6202), or 66% performance if calls are SRTP encrypted Up to 5 layers of IVR (Interactive Voice Response) ![]() Multiple configurable call queues, automatic call distribution (ACD) based on agent skills/availability/busy level, in-queue announcement Yes, with enable/disable option upon call establishment and termination TCP/UDP/IP, RTP/RTCP, ICMP, ARP, DNS, DDNS, DHCP, NTP, TFTP, SSH, HTTP/HTTPS, PPPoE, SIP (RFC3261), STUN, SRTP, TLS, LDAPĬall Progress Tone, Polarity Reversal, Hook Flash Timing, Loop Current Disconnect, Busy Toneīellcore/Telcordia, ETSI-FSK, ETSI-DTMF, SIN 227 – BT TFTP/HTTP/HTTPS, auto-discovery & auto-provisioning of Grandstream IP endpoints via ZeroConfig (DHCP Option 66 multicast SIP SUBSCRIBE mDNS), eventlist between local and remote trunk LEC with NLP Packetized Voice Protocol Unit, 128ms-tail-length carrier grade Line Echo Cancellation, Dynamic Jitter Buffer, Modem detection & auto-switch to G.711 Yes (supports router mode and switch mode) 2 ports (both with lifeline capability in case of power outage)ĭual Gigabit RJ45 ports with integrated PoE Plus (IEEE 802.3at-2009)
0 Comments
Leave a Reply. |